The working environment of Automatic locking screw machine

With the development of automatic locking screw machine, more and more industrial enterprises began to use automatic locking screw machine constantly. Its appearance completely replaced the manual lock pay screw, so what kind of environment can be used? Let me show you today.

Automatic screw machine working voltage: General air compressor voltage by customers themselves configuration, air compressor with 220V or 380V, genarally automatic locking screw machine power supply voltage is 220V, including handheld screw machines, multi-axis automatic screw machine, XY automatic screw machine, including hand-held screw mechanical and electrical group of internal components of the voltage is to convert the voltage of 220V to 36V. The working voltage of the internal components of the automatic screw locking machine is to convert the power supply voltage from 220V to 24V. General factory configuration of 220V voltage can be.

Automatic screw machine working temperature: automatic screw locking machine belongs to automatic equipment, rather than special equipment, its working temperature and other mechanical similar, generally in -20℃ to 40℃. Too low temperture will affect the normal work of some components.

Precautions: keep the electric nose on the electric mouth sliding smoothly, otherwise it will make the screw is not easy to enter the electric nose, affecting the use of the machine. Do not bend the screw conveying pipe, otherwise the screw will get stuck in the bend during the conveying process. Be sure to wait until the torque of the electric batch reaches the set torque and the electric batch stops automatically before lifting the electric batch, otherwaise the machine will not operate, and send a screw to the nose of the electric batch to be locked.

The above is about the working environment of the automatic locking screw machine. Suggestion: the air pressure should not be adjusted too much, otherwise, it will only accelerate the wear rate of the electric nose. The vibration force of the track can not be adjusted too much, otherwise the screw is easy to extude the track on the screw track, affecting the stability of the machine.

http://www.yuccitech.com/index.php?catid=8