What is the skills for Automatic lock screw machine debugging?

Automatic locking screw machine means there is no hand to take under the condition of the screw, the machine can pay stable operation of the lock screw, can send automatic screw batch of pipes, easily press the electric lock screw, and particularly high efficiency of automatic lock screw machine, can significantly reduce the intensity of workers, so there are more and more people choose and use sophisticated automation equipment, automatic locking screw machine. Then how to debug the automatic locking screw machine before it is officially used?

The first is the brush debugging: use the brush after loading the screws, need to turn on the off the power, brush modulation to the track near observation and adjust the height of the brush, so that the brush and the screws on the track have a slight contact.

Next adjust the screw through the plate and the sensor: In the process of automatic lock screw machine debugging, also need to adjust screw through the plate, ensure its highly appropriate, you also need to adjust the sensor, because when the screw is in the middle of the sensor transmitter and the receiver, automatic locking screw machine will only be induced to screw, so when debugging to abserve the height of the sensor.

The last step is to adjust the track and material module: In the debugging process of automatic lock screw machine, rail and points the adjustment of the module is key, only the orbit and points are to adjust to no longer contact, to avoid due to track and points are the impact phenomenon of points are repeated with positive & negative, also can avoid the gap is too big, that screw fell into internal phenomenon of the machine. And if there is contact between the track and the feeding plate, the friction will increase, so it is necessary to adjust the track and the feeding module bit by bit to ensure that the two will not contact.

The above is the introduction of the debugging skills of the automatic locking screw machine. In addition to the above debugging points, the height of the press plate needs to be adjusted, and the stop interval time of the screw machine, it can be seen that the debugging of automatic locking screw machine is also very tedious work.