How to transport screws for Automatic locking screw machine? 

Automatically lock screw machine is a kind of automation equipment, it is used to help employees improve the efficiency of screw lock pay automation equipment, automatic locking screw machine can pay stable lock screw, its stable feed has certain reason, feeder is an indispensable part of a device can work stable, its blowing type and gas suction feeding way is mainly the two. How does the automatic locking screw machine deliver screws?Many people may not be very clear, today I will talk about this topic, hoping to answer your doubts!

Blow type feeding: blow type is generally suitable for M5 screws, the length is less than 25, and the total length of the screw L should be greater than 1.3 of the diameter of the screw head D, otherwise in the feeding pipe will produce the phenomenon of side turn, can't be sent out normally, the efficiency of sorting can reach 1s/pcs.

Air suction type feeding is generally suitable for relatively small length, light weight, blowing type can't achieve the screw, at the same time the upper surface of the screw head and electric batch of vacuum suction head cavity to form a certain air tightness, it is suitable for most screws, especially those which don't meet the requirement of aspect ratio.

Air suction type feeding: compared with the air blowing type, its structure is relatively simple, the manufacturing cycle is relatively short, its main characteristics: if the screw is too small or too short, blowing machine can't be achieved automatically send nail, robots driven electric group of drain screw and move lock (lock screw one by one point), screw mainly through adsorption force produced by electric head of compressed air, taking a single screw, and then run positioning on the number of the product, electric group of downward automatically lock into products, the sorting efficiency is related to the walking distance and running speed, generally 1.5-4s/pcs.

 http://www.yuccitech.com/index.php?id=14